Features and Benefits
H-Class Features
Mechanical Features
Direct-Thermal printing
Easy loading
Media Tear Bar
Three-inch
Media Hub
Fan-fold media handling (bottom and rear)
Die Cast Media
Supply Hub
RFID Upgradeable
Electrical Features
IntelliSEAQ™ Printhead
8 FLASH Memory (MB)
16 DRAM Memory (MB)
Serial RS-232/422 Interface
IEEE 1284 Compliant Parallel Interface
USB
(device) Interface, Version 2.0
USB Host Ports (2) (internal remote)
("X" models)SDIO Interface (internal remote)
("X" models)
Ethernet LAN
Graphics Display with back light (240X320)
("X" models)
Graphics Display with back light (128X64)
(standard models)
Software Features
On-demand and batch mode printing
EFIGS (English, French, Italian,
German and Spanish) LCD languages
Scalable font engine with two font
typefaces.
Time and Date battery back up
Host Computer accessible RAM
and Flash memory for object temporary storage
Fault handling with reprint
or void selection
Internal test labels for printhead verification, and
print quality validation
Internal Configuration Label
Text, bar code,
graphic, and image printing capabilities
Factory default configuration
restorable
Resident multiple setup store and restore capability
Time
stamp at print capability
Label retract control after print
Ribbon low
detection and warning
Power-up diagnostics
Resident option hardware
diagnostics
Diagnostic display and modes
Media counters
Front panel
security
Input line mode (ASCII text input) capability
Option hardware
auto detection
Scalable font, dynamic font attributes, bold and italics
Downloadable firmware upgrades
H-Class Options
Thermal Transfer
A printing method that uses ribbon to produce exceptional image clarity,
as compared to most direct thermal media types. The 4 section split-hub
design allows for lower torque on narrow ribbons. This option can be used
with either ‘coated side in’ ribbons or ‘coated side out’ ribbons.
40mm Media Hub
A rotating media hub that will accommodate 40mm media cores.
Standard Peel & Present
A simple "plate" style design that automatically separates most printed
labels from the backing material and allows subsequent printing to occur
only after the removal of a previously printed label. Minimum label length
is 1.5 inches (38 mm).
Heavy Duty Peel & Present
(4" models only)An internally "overdriven" design that auto-matically
separates printed labels from the backing material and allows subsequent
printing to occur only after the removal of a previously printed label.
Minimum label length is 1.5 inches (38 mm).
Cutter
Plug and Play. Attach the option and it is auto detected during power
up. The cutter is a rotary type mechanism capable of cutting media from
.0025" to .0100" (.0635mm - .254mm) thick, and the cutter life is designed
to exceed 500,000 cuts.
Self-Powered Internal Rewind
("X" models only)A heavy-duty 8" label rewind option using a
dedicated DC motor to tightly rewind a full 8" roll of labels and backing
onto a 3" diameter core.
Internal Rewind
(standard models only)A heavy-duty label rewind option to tightly
rewind a 5.5" roll of labels and backing onto a 3" diameter core.
Present Sensor
An output control device that allows subsequent printing to occur only
after the removal of a previously printed label.
Barcode Linear Scanner
Factory installed. This new design provides 100% check on every barcode
label. If unreadable it will automatically void the labels containing failed
bar codes. Supports picket style bar codes.
MCL
A MCL-enabled Datamax printer becomes an intelligent printer with the
ability to accept input from devices such as scanners, scales, keyboards, or
other peripherals. The printer-resident MCL application can then process
received data and performs any number of resulting functions.
RFID-Ready Printer
Factory installed antenna and wiring, for use with future RFID module
purchase.
RFID-Ready Upgrade Kit
UHF RFID Upgrade Kit for use with RFID Ready printers. The kit contains
a multi-protocol; EPCglobal and Gen2 compatible, w/power RFID module.
RFID-Built
The RFID option demonstrates the flexibility and protection against
obsolescence provided by the modular design of Datamax H-Class printers.
Based on "from the ground up" design, the RFID antenna is located inside the
paper path to give a more precise read.
ILPC Fonts
An expandable international language font to support broader printing
needs.
> CG-Times (western European) Scalable font
> Kanji Gothic B
Scalable font
> Simplified Chinese GB Scalable font
> Korean Hangul
font
DMXWare XML
XML parsing to accommodate ERP and RFID label requirements from
companies including SAP and Oracle.
Large Display Upgrade
(standard models only)Upgrades the standard short model display
to the larger 320x240 display that is standard on tall models.
SDIO/USB Host Interface Upgrade
(standard models only)Upgrades the standard short model with
SDIO/USB Host interface that is standard on tall models.
