IT Check

Specifications

• Service Content
  Power Quality
  · Grounding and Earthling: Resistance at main SB and at another random point of the
  data centre and Equipotent evaluation.
  · AC power events at main SB and Data Centre SB:
  · Frequency, Voltage, Transients, Conducted noise, Outages, Sags, Swells
  · Harmonics: measurements at main SB LV and Data Center SB.
  · Electrical system dimensioning analysis: UPS, engine generators, etc. (redundancy)
  · Thermography: switch boards analysis (connection points), buss-bar and specific
  machines.
  Electromagnetic Fields
  · Electrical Fields: Measurements at different points
  of the Data Centre, depending in its size and
  following the Maxwell Equations.
  · Magnetic Fields: Measurements in accordance to
  the Maxwell equations. In this case will be measure
  the Magnetic Field in the 2 Data Centres according to the layout of the Electrical
  Cables, Electrical Switches, UPSs and Transformers situation, but at least every 4x4
  meters in a bi-dimensional lay out of the room.
  · Risk analysis: Evaluation of TEMPEST (Transient Electro Magnetic Pulse Emanation
  Technology).

Features and Benefits

Data Network
· Copper cable quality: transmission parameters collection of 15
cables following the ISO 11801 (with two link and channel test
on every one), specifically: cross-talk, attenuation, Next, Fext,
ACR (Attenuation Cross Talk Ratio), Power Sum Next, Power
Sum Fext.
Operation Security
· Check the existence of a DC’s Procedures-Operations
Manual.
· DC’s Access System Evaluation.
· Check the location of switches, computers, routers, HVAC
equipment, etc.
· Check the protections of switches at power boards.
· Fire protection system evaluation.
Structural Security
· Site location and associated potential risks
· Architectural structure
· Anti-vandalism and intrusion
· Fire resistance and protection:
RF60, 90 or 120ü EN23093 , EN1047
· Gas tight
· Water protection:
IP 62
IP65
· Thermal stability

Free Solution Consultation