Supplemental Zone & Spot Cooling (Pumped Refrigerant Based)

Specifications

• Liebert XDO — Overhead Fan Coil: This ceiling-installed unit is placed above the heat-emitting equipment, drawing hot air from the Hot Aisle and discharging cold air down into the Cold Aisle. Connects via flexible piping and uses pumped refrigerant technology.
  
  Liebert XDV — Vertical Top Cooler: The XDV is installed above or on the rack enclosure. It draws in hot air from inside the enclosure or from the Hot Aisle. It then cools the air and discharges it down into the Cold Aisle. Connects via flexible piping and uses pumped refrigerant technology.
  
  Liebert XDH — Horizontal Row Cooler: The XDH is placed in line with rack enclosures and air from the hot aisle is drawn in through the rear of the unit, cooled, and discharged into the cold aisle where the electronic equipment air inlets are located. Connects via flexible piping and uses pumped refrigerant technology.
  
  Liebert XD CoolFrame — Rack Cooler: The Liebert XD CoolFrame is designed and performance certified when attached to the back of the Egenera BladeFrame EX rack. It cools the exhaust air from the rack before the air enters the room. Connects via flexible piping to the liebert XD system and uses pumped refrigerant technology. Liebert is a member of Egenera Inc. Assured Solution Alliance program. For more information on Egenera or their BladeFrame EX, visit www.egenera.com
  
  Liebert XDP — Pumping Unit: When a building chilled water system is available, the XDP serves as an intermediary, to isolate the building chilled water circuit from the pumped refrigerant circuit. It circulates the refrigerant to the cooling modules at a temperature always above the actual dew point to prevent condensation.
  
  Liebert XDC — Refrigerant Chiller: The XDC is an indoor unit that connects directly to the modules via the pumped refrigerant circuit. It circulates the refrigerant to the cooling modules at a temperature always above the actual dew point to prevent condensation.
  
  Liebert XD Piping: The XD Piping is pre-fabricated distribution piping that is installed in anticipation of a growing and changing system. XD cooling modules are added as required and are quickly made operational with flexible connection piping with quick-connect fittings. The flexible connection piping also allows the cooling modules to be re-positioned without interruption in operation. Liebert XD Piping makes the system adaptive and provides for future expansion and simplifies both the installation of additional units and the reconfiguration of components as needs change.
  
  Liebert XDA — Air Flow Enhancer: Lightweight fan unit is mounted to the exhaust side of a rack enclosure. The XDA, that is compatible with most rack enclosures, increases the airflow through densely populated enclosures, past congested cabling, thus removing hot spots within the enclosure that can threaten the uptime of critical systems.
  
  Features
  
  
• Can Cool More Than 30 kW per rack
  
• Utilizes Pumped Refrigerant Technology
  
• Energy Efficient
  
• Intelligent Controls of the Refrigerant
  
• Floor Space Efficient
  
• Scalable and Flexible